How do I fix error code dS E on my LG LFCS22520W?

1. undefined: Check for a loose connection at CON7 from Main PCB. 2. undefined: Unplug connector from CON7. 3. undefined: Measure resistance between Brown and Brown wires (Drawer Model), or Orange to Orange (Swing Model). 4. undefined: If 0 ohm (short): Replace the defrost sensor. 5. undefined: If open (infinite/OL): Replace the refrigerator control board (Main PCB). 6. undefined: If within range, verify against Temperature Table-3: 23F(-5C)=38.5-36.5kΩ, 32F(0C)=30.5-29.5kΩ, 41F(5C)=24.5-23.5kΩ, 50F(10C)=20-19kΩ, 59F(15C)=16-15.5kΩ. 7. undefined: If resistance is normal for ambient temperature, check wiring harness for intermittent opens.

LG LFCS22520WRefrigerator

Error Code dS E

Defrost Sensor Error

Moderate

Address soon - your appliance may not work properly

Also displayed as: dS E

How to Fix

1
Check for a loose connection at CON7 from Main PCB.
2
Unplug connector from CON7.
3
Measure resistance between Brown and Brown wires (Drawer Model), or Orange to Orange (Swing Model).
4
If 0 ohm (short): Replace the defrost sensor.
5
If open (infinite/OL): Replace the refrigerator control board (Main PCB).
6
If within range, verify against Temperature Table-3: 23F(-5C)=38.5-36.5kΩ, 32F(0C)=30.5-29.5kΩ, 41F(5C)=24.5-23.5kΩ, 50F(10C)=20-19kΩ, 59F(15C)=16-15.5kΩ.
7
If resistance is normal for ambient temperature, check wiring harness for intermittent opens.